Tonik's Lab

Turntables, Repairs, & Accessories

Whether it’s Technics, Pioneer, Ortofon or any other brand we got you covered!

You’ll find we have a wide variety of accessories for all your audio needs!

Quick View

Tonik's Lab

Comprehensive Repair Pkg

ON SALE $602.50 Special Product: $549.99 Buy

This includes our Exclusive: Comprehensive 100 Point Diagnostic Service,  Show Room Restoration & Cleaning Service*, Replacement RCA Cable With Internal Grounds & New PCB , Spindle Restoration and Oil service, Pitch Control Replacement & Calibration - SL 1200 / 1210 Mk2/M3D/ MK5 & Exclusive Sealed Tonearm Bearing Replacement. LED Pop-up Illumination Light Repair or Replacement.  *Color Coatings Sold Separately*

Tonik's Lab - Comprehensive Repair Pkg
$549.99 ON SALE
Quick View

Tonik's Lab

Light Maintenance Package

ON SALE $363.96 Special Product: $299.00 Buy

This includes our Exclusive: Comprehensive 100 Point Diagnostic Service,  Show Room Restoration & Cleaning Service*,  Replacement RCA Cable With Internal Grounds & New PCB ,  Spindle Restoration and Oil service,  Pitch Control Calibration - SL 1200 / 1210 Mk2/M3D/MK5.

Tonik's Lab - Light Maintenance Package
$299.00 ON SALE
Quick View

This is a tricky subject. There are a lot of moving parts on your tonearm everything from S-tubes to Anti-skating mechanisms. That's why our team will happily help you get a better understanding of what may be needed to get you back up and running. Leave out the guesswork and talk to an expert today!

Tonik's Lab - Comprehensive Tonearm Repairs
$299.99
Quick View

This should not be tried at home! There are so many ways for turntable motors to fail or act faulty. Rest assured our team does not "Plug & Play". That's why our team offers a comprehensive diagnostic service to troubleshoot and solve your motor related problems. We want help you get a better understanding of what may be needed before you just start replacing things. *Contact us today!

Tonik's Lab - Comprehensive Motor Repairs
$299.99
Quick View

This will restore platter boot up speeds and improve torque! A Complete Restoration of  the Spindle Assembly for Motor / Platter . Removal of Burrs, Marring & Wear on center pin and outer bearing. Technics Direct Drive Oil and Graphite protection layer replaced.

Tonik's Lab - Spindle Restoration and Oil service
$29.99
Quick View

This Includes Conversion Of Pop Up Light, From OEM Bulb To Robotics Grade Led, With Your Choice Of Color!

Tonik's Lab - LED Pop-up Illumination Light Repair or Replacement
$34.99
Quick View

Pitch Control Calibration to OEM Specification. *Parts worn beyond 10% tolerance will not properly calibrate and will need to be replaced to achieve proper calibration.*   

Tonik's Lab - Pitch Control Calibration - SL 1200 / 1210 Mk2/M3D/MK5
$34.99
Quick View

New Pitch Control SFDZ122N11-2 / SFDZ122N11-3  & Calibrating Of Unit (Optional 0 Click Removal at No Extra Charge!).

Tonik's Lab - Pitch Control Replacement & Calibration - SL 1200 / 1210 Mk2/M3D/ MK5
$99.99
Quick View

Have a loose tonearm? Just can't Back Cue or Scratch Like you use to? Or maybe your records skip and your not sure why. This is generally a bearing problem.. This includes complete replacement of the pivotal bearings that allow the tonearm to track properly on your records. These Exclusive New Sealed Bearings Are Rated for 30,000 Hours of Continuous Use!

Tonik's Lab - Exclusive Sealed Tonearm Bearing Replacement
$149.99
Quick View

This Includes New Set Of Tonik's Lab Exclusive Coaxial Double Shielded, Foamed PE, Digital Audio RCA Cables With 24K Gold Plated Gripped Connectors For Maximum Durability and Connectivity. Included Internal Grounding & New RCA PCB!

Tonik's Lab - Replacement RCA Cable With Internal Grounds & New PCB
$149.99
Quick View

This is no simple wipe down and canned air cleaning job... This Service provides a comprehensive breakdown and cleaning of all of your turntable parts! We treat your turntable like a Rolls Royce getting ready for its Show Room Debut. This also includes freeing of any frozen height adjustments, corrosion on head-shell collars sockets, lubricant replacement etc. Don't settle for less... *Results may vary. Does not replace / repair any damaged or broken parts. 

Tonik's Lab - Show Room Restoration & Cleaning Service*
$99.99
Quick View

This services includes our 100 point  inspection process by our expert team. This includes critical areas like: Tonearm Bearings, Tonearm Base Assembly, Tonearm Wiring, Platter Balance & Rotation, Motor Functionality & Voltage Ratings on Pin-Outs / Test Points, IC Chips, Resistors, Capacitors, Transistors etc. Pitch Calibration, Pitch Ohm Ratings Are all examined and further tested on an Oscilloscope. We take pride in making sure our customers get the repairs they need!

Tonik's Lab - Comprehensive Diagnostic Service
$49.99
Quick View

Tonik's Lab

Full Repair Pkg

Special Product: $1050.00 Buy

This Package is Designed to Cover Any and All Repairs including our Exclusive: Comprehensive 100 Point Diagnostic Service,  Show Room Restoration & Cleaning Service*, Replacement RCA Cable With Internal Grounds & New PCB , Spindle Restoration and Oil service, Pitch Control Replacement & Calibration - SL 1200 / 1210 Mk2 M3D MK5, Exclusive Sealed Tonearm Bearing Replacement, LED Pop-up Light Repair, Comprehensive Motor Repairs & Comprehensive Tonearm Repairs. *Color Coatings Sold Separately*  

Tonik's Lab - Full Repair Pkg
$1050.00
Quick View

Perfect for the mix/club DJ or Turntable Audiofile enthusiast.

Our 21oz Custom Turntable Slipmats are sublimated with high quality 1200x1200 DPI printing.
These are made from only the highest quality 21oz felt material and are mimicked after the thick old-school Technic slipmats, which are more prevalent in the European market. These slipmats are dense, but still soft to the touch on both sides without the glazed bottom surface.

Description

Professional Grade 21oz Custom Slipmats for 12″ Turntables

Material Specs
Color: White
Material: 100% polyester felt
Weight: 21oz
Dimensions: 11.75″ Diameter
Thickness: 0.125 (1/8″)
Bottom Surface: Plain surface
Grade: Strong High Quality
Feel: Dense / Soft
Accuracy: Precise
Print Method: Sublimation
Print Sides: 1 Sided

Tonik's Lab - Tropical Tonik's Lab 21oz Slipmat
$14.99
Quick View

Technics 1200 MK2 M3D MK5 M5G Custom Turntable Shipping Box (Low Profile Design)

 

Technics 1200 Mk2 M3D MK5 M5G Custom Turntable Shipping Box.  

Condition is New.

This box can be used to ship or store your turntable.  It’s design is made to be simple and durable. Our heavy weight cardboard  design will withstand up to 200 pounds of crushing force and  anti-static polyethylene inserts allow for maximum protection with a  very low profile design that will cut your shipping costs and save  space!

This box is capable of shipping your Technics 1200 series turntable with or without the dust cover!

**Paperwork and turntable shown in pictures are not included in the purchase and are only shown for demonstration purposes.

Box will come with instructions / booklet on how to assemble.

Tonik's Lab - Tonik's Lab Custom Turntable Shipping box
$64.99
Quick View

PERFECT FOR SCRATCH DJ’s & TURNTABLISTS

Tonik's Lab 9oz 12″ Custom Slipmats are made from only the highest
quality compressed 9oz felt material. – made in the USA.
These slipmats are perfect for Portable Scratch DJ’s and Scratch DJ’s.
Using this super thin low profile, medium stiffness slipmat will give an
extra fast feel with smooth/precise handling.
If you are looking for scratch/battle mats to cut the competition these are your slipmats!

We use a sublimation printing technique.
This method of printing has been crowned king for it’s ability to dye the fibers of the felt without leaving a residue or any sort of top surface feel. Our inks will keep colors vibrate and from fading once printed.
The artwork will last the life of the mat.

GLAZED SURFACE
These Custom Slipmats are produced with our specialized Glazed bottom surface.
We’ve spent over a 1.5 decades perfecting this Glazed surface to get the most
accurate handling possible from a slipmat and has become the industries professional standard in slipmats.
So…. you can throw your wax paper and plastics in the trash;
our Glazed surface is putting “SLIP” back into SLIPMAT.

Description

Slipmats Custom Printed – 12″ Professional Grade 9oz Glazed

Material Specs
Color: White
Material: 100% polyester felt
Weight: 9oz
Dimensions: 11.75″ Diameter
Thickness: 0.03125″ (1/32″), (0.7938 mm)
Bottom Surface: Glazed
Grade: Strong High Quality
Feel: Medium Stiffness
Accuracy: Precise
Print Method: Sublimation
Print Sides: 1 Sided
Preferred Market Use:  Scratch DJ’s

 

Tonik's Lab - Tonik's Lab 808 9oz Glazed Slipmats
$24.99
Quick View

PERFECT FOR SCRATCH DJ’s & TURNTABLISTS

Tonik's Lab 9oz 12″ Custom Slipmats are made from only the highest
quality compressed 9oz felt material. – made in the USA.
These slipmats are perfect for Portable Scratch DJ’s and Scratch DJ’s.
Using this super thin low profile, medium stiffness slipmat will give an
extra fast feel with smooth/precise handling.
If you are looking for scratch/battle mats to cut the competition these are your slipmats!

We use a sublimation printing technique.
This method of printing has been crowned king for it’s ability to dye the fibers of the felt without leaving a residue or any sort of top surface feel. Our inks will keep colors vibrate and from fading once printed.
The artwork will last the life of the mat.

GLAZED SURFACE
These Custom Slipmats are produced with our specialized Glazed bottom surface.
We’ve spent over a 1.5 decades perfecting this Glazed surface to get the most
accurate handling possible from a slipmat and has become the industries professional standard in slipmats.
So…. you can throw your wax paper and plastics in the trash;
our Glazed surface is putting “SLIP” back into SLIPMAT.

Description

Slipmats Custom Printed – 12″ Professional Grade 9oz Glazed

Material Specs
Color: White
Material: 100% polyester felt
Weight: 9oz
Dimensions: 11.75″ Diameter
Thickness: 0.03125″ (1/32″), (0.7938 mm)
Bottom Surface: Glazed
Grade: Strong High Quality
Feel: Medium Stiffness
Accuracy: Precise
Print Method: Sublimation
Print Sides: 1 Sided
Preferred Market Use:  Scratch DJ’s

 

Tonik's Lab - Turntable Karate - 9oz Glazed Slipmats
$29.99
Quick View

Perfect for the mix/club DJ or Turntable Audiofile enthusiast.

Our 21oz Custom Turntable Slipmats are sublimated with high quality 1200x1200 DPI printing.
These are made from only the highest quality 21oz felt material and are mimicked after the thick old-school Technic slipmats, which are more prevalent in the European market. These slipmats are dense, but still soft to the touch on both sides without the glazed bottom surface.

Description

Professional Grade 21oz Custom Slipmats for 12″ Turntables

Material Specs
Color: White
Material: 100% polyester felt
Weight: 21oz
Dimensions: 11.75″ Diameter
Thickness: 0.125 (1/8″)
Bottom Surface: Plain surface
Grade: Strong High Quality
Feel: Dense / Soft
Accuracy: Precise
Print Method: Sublimation
Print Sides: 1 Sided

Tonik's Lab - Turntable Karate - 21oz Heavy Slipmat
$29.99
Quick View

PERFECT FOR SCRATCH DJ’s & TURNTABLISTS

Tonik's Lab 9oz 12″ Custom Slipmats are made from only the highest
quality compressed 9oz felt material. – made in the USA.
These slipmats are perfect for Portable Scratch DJ’s and Scratch DJ’s.
Using this super thin low profile, medium stiffness slipmat will give an
extra fast feel with smooth/precise handling.
If you are looking for scratch/battle mats to cut the competition these are your slipmats!

We use a sublimation printing technique.
This method of printing has been crowned king for it’s ability to dye the fibers of the felt without leaving a residue or any sort of top surface feel. Our inks will keep colors vibrate and from fading once printed.
The artwork will last the life of the mat.

GLAZED SURFACE
These Custom Slipmats are produced with our specialized Glazed bottom surface.
We’ve spent over a 1.5 decades perfecting this Glazed surface to get the most
accurate handling possible from a slipmat and has become the industries professional standard in slipmats.
So…. you can throw your wax paper and plastics in the trash;
our Glazed surface is putting “SLIP” back into SLIPMAT.

Description

Slipmats Custom Printed – 12″ Professional Grade 9oz Glazed

Material Specs
Color: White
Material: 100% polyester felt
Weight: 9oz
Dimensions: 11.75″ Diameter
Thickness: 0.03125″ (1/32″), (0.7938 mm)
Bottom Surface: Glazed
Grade: Strong High Quality
Feel: Medium Stiffness
Accuracy: Precise
Print Method: Sublimation
Print Sides: 1 Sided
Preferred Market Use:  Scratch DJ’s

Tonik's Lab - Tropical Tonik's Lab Slipmats 9oz Glazed
$24.99
Quick View

Perfect for the mix/club DJ or Turntable Audiofile enthusiast.

Our 21oz Custom Turntable Slipmats are sublimated with high quality 1200x1200 DPI printing.
These are made from only the highest quality 21oz felt material and are mimicked after the thick old-school Technic slipmats, which are more prevalent in the European market. These slipmats are dense, but still soft to the touch on both sides without the glazed bottom surface.

Description

Professional Grade 21oz Custom Slipmats for 12″ Turntables

Material Specs
Color: White
Material: 100% polyester felt
Weight: 21oz
Dimensions: 11.75″ Diameter
Thickness: 0.125 (1/8″)
Bottom Surface: Plain surface
Grade: Strong High Quality
Feel: Dense / Soft
Accuracy: Precise
Print Method: Sublimation
Print Sides: 1 Sided

Tonik's Lab - Tonik's Lab 808 21oz Heavy Slipmat
$14.99
Quick View

A Pair (2) 21oz Harry Potter inspired Deathly Hallows Slipmats

$24.99
Quick View

Tonik's Lab

Skull

Vinyl Accessories: $24.99 Buy

A pair(2) 21oz slipmats

Tonik's Lab - Skull
$24.99
Quick View

Tonik's Lab

Spooky Graveyard

Vinyl Accessories: $24.99 Buy

A pair(2) 21oz slipmats.

Tonik's Lab - Spooky Graveyard
$24.99
Quick View

Tonik's Lab

Graveyard

Vinyl Accessories: $24.99 Buy

A pair(2) 21oz slipmats

Tonik's Lab - Graveyard
$24.99
Quick View

Ortofon Concorde MK2 Scratch Single Cartridge

New levels of performance
The Concorde Scratch allows turntablist and scratching DJs to achieve new levels of performance with an unprecedented tracking ability and extra high output. • The SCRATCH is intended especially for scratching and back-cueing. The SCRATCH uses spherical styli, as they preserve more of the groove over backcueing and scratching.  • For DJs that require increased tracking ability, the SCRATCH is up to the task. The Scratch has a supreme ability to trace the grooves of the records and it is tailored specifically for scratch.  • Due to its very high output 10 mV, it is perfect for scratch of all music with deep bass frequences. With solid bass reproduction and extended highs, the SCRATCH is great for any style, providing energetic sound. Maximum scratch performance guaranteed!
Concorde SCRATCH technical data
  • Stylus Type Spherical
  • Tracking Force 4.0 g
  • Output Voltage 10 mV
  • Frequency Range 20-18.000 Hz
 
Output voltage at 1000Hz, 5cm/sec. - 10 mV Channel balance at 1kHz - 1 dB Channel separation at 1kHz - 22 dB Channel separation at 15 kHz - 15 dB Tracking ability at 315 Hz at recommended tracking force - 120 μm Compliance, dynamic lateral - 14 μm/m N Stylus type - Spherical R 18 μm Tracking force range - 3 - 5 g Tracking force recommended - 4 g Internal impedance, DC resistance -  1200 Ohm Internal inductance -  850 mH Recommended load resistance -  47 kOhm Recommended load capacitance -  200-400 pF Cartridge weight - 18,5 g Replacement stylus unit - SCRATCH
📷
Spares and Merchandise
Concorde SCRATCH is available in following configurations:  • Concorde TWIN (two Concorde MkII MIX cartridges with preinstalled styli), supplied in Flight case • Concorde Single (one Concorde MkII MIX cartridge with preinstalled stylus)
Ortofon - Ortofon Concorde MK2 Scratch Single Cartridge
ON SALE
Quick View

Ortofon

Ortofon Stylus MK II Scratch (Replacement)

Vinyl Accessories: UNAVAILABLE

Ortofon Stylus MK II Scratch (Replacement)

New levels of performance
The Concorde Scratch allows turntablist and scratching DJs to achieve new levels of performance with an unprecedented tracking ability and extra high output. • The SCRATCH is intended especially for scratching and back-cueing. The SCRATCH uses spherical styli, as they preserve more of the groove over backcueing and scratching.  • For DJs that require increased tracking ability, the SCRATCH is up to the task. The Scratch has a supreme ability to trace the grooves of the records and it is tailored specifically for scratch.  • Due to its very high output 10 mV, it is perfect for scratch of all music with deep bass frequences. With solid bass reproduction and extended highs, the SCRATCH is great for any style, providing energetic sound. Maximum scratch performance guaranteed!
Concorde SCRATCH technical data
  • Stylus Type Spherical
  • Tracking Force 4.0 g
  • Output Voltage 10 mV
  • Frequency Range 20-18.000 Hz
 
Output voltage at 1000Hz, 5cm/sec. - 10 mV Channel balance at 1kHz - 1 dB Channel separation at 1kHz - 22 dB Channel separation at 15 kHz - 15 dB Tracking ability at 315 Hz at recommended tracking force - 120 μm Compliance, dynamic lateral - 14 μm/m N Stylus type - Spherical R 18 μm Tracking force range - 3 - 5 g Tracking force recommended - 4 g Internal impedance, DC resistance -  1200 Ohm Internal inductance -  850 mH Recommended load resistance -  47 kOhm Recommended load capacitance -  200-400 pF Cartridge weight - 18,5 g Replacement stylus unit - SCRATCH
📷
Spares and Merchandise
Concorde SCRATCH is available in following configurations:  • Concorde TWIN (two Concorde MkII MIX cartridges with preinstalled styli), supplied in Flight case • Concorde Single (one Concorde MkII MIX cartridge with preinstalled stylus)
Ortofon - Ortofon Stylus MK II Scratch (Replacement)
ON SALE
Quick View

Ortofon

Ortofon Concorde MK2 Scratch Twin Cartridge

Vinyl Accessories: UNAVAILABLE

Ortofon Concorde MK2 Scratch Twin Cartridge

New levels of performance
The Concorde Scratch allows turntablist and scratching DJs to achieve new levels of performance with an unprecedented tracking ability and extra high output. • The SCRATCH is intended especially for scratching and back-cueing. The SCRATCH uses spherical styli, as they preserve more of the groove over backcueing and scratching.  • For DJs that require increased tracking ability, the SCRATCH is up to the task. The Scratch has a supreme ability to trace the grooves of the records and it is tailored specifically for scratch.  • Due to its very high output 10 mV, it is perfect for scratch of all music with deep bass frequences. With solid bass reproduction and extended highs, the SCRATCH is great for any style, providing energetic sound. Maximum scratch performance guaranteed!
Concorde SCRATCH technical data
  • Stylus Type Spherical
  • Tracking Force 4.0 g
  • Output Voltage 10 mV
  • Frequency Range 20-18.000 Hz
 
Output voltage at 1000Hz, 5cm/sec. - 10 mV Channel balance at 1kHz - 1 dB Channel separation at 1kHz - 22 dB Channel separation at 15 kHz - 15 dB Tracking ability at 315 Hz at recommended tracking force - 120 μm Compliance, dynamic lateral - 14 μm/m N Stylus type - Spherical R 18 μm Tracking force range - 3 - 5 g Tracking force recommended - 4 g Internal impedance, DC resistance -  1200 Ohm Internal inductance -  850 mH Recommended load resistance -  47 kOhm Recommended load capacitance -  200-400 pF Cartridge weight - 18,5 g Replacement stylus unit - Scratch
📷
Spares and Merchandise
Concorde SCRATCH is available in following configurations:  • Concorde TWIN (two Concorde MkII MIX cartridges with preinstalled styli), supplied in Flight case • Concorde Single (one Concorde MkII MIX cartridge with preinstalled stylus)
Ortofon - Ortofon Concorde MK2 Scratch Twin Cartridge
ON SALE
Quick View

Ortofon Replacement stylus MKII MIX (Replacement)

Concorde MIX Replacement Stylus technical data
  • Stylus Type Spherical
  • Tracking Force 3.0 g
  • Output Voltage 6 mV
  • Frequency Range 20-20.000 Hz
 
Output voltage at 1000Hz, 5cm/sec. - 6 mV Channel balance at 1kHz - 1,5 dB Channel separation at 1kHz - 20 dB Channel separation at 15 kHz - 15 dB Tracking ability at 315 Hz at recommended tracking force - 100 μm Compliance, dynamic lateral - 14 μm/m N Stylus type - Spherical R 18 μm Tracking force range - 2 - 4 g Tracking force recommended - 3 g Internal impedance, DC resistance -  700 Ohm Internal inductance -  450 mH Recommended load resistance -  47 kOhm Recommended load capacitance -  200-600 pF Cartridge weight - 18,5 g Replacement stylus unit - MIX
Ortofon - Ortofon Replacement stylus MKII MIX (Replacement)
ON SALE
Quick View

Ortofon

Ortofon Concorde MK2 Mix Twin Cartridge

Vinyl Accessories: UNAVAILABLE

Ortofon Concorde MK2 Mix Twin Cartridge

The MIX is a general-purpose model for scratch and back-cueing
• Provides great performance and durability. It has a good quality spherical stylus, a solid cantilever, and serves general purposes well. • It offers both reasonable output, high sound quality and a good tracking ability for virtually any style of music. • With transparent sound across the spectrum and excellent handling ability, the MIX represents one of the longest running values in DJ cartridges.
Excellent price-to-performance ratio.
Concorde MIX technical data
  • Stylus Type Spherical
  • Tracking Force 3.0 g
  • Output Voltage 6 mV
  • Frequency Range 20-20.000 Hz
 
Output voltage at 1000Hz, 5cm/sec. - 6 mV Channel balance at 1kHz - 1,5 dB Channel separation at 1kHz - 20 dB Channel separation at 15 kHz - 15 dB Tracking ability at 315 Hz at recommended tracking force - 100 μm Compliance, dynamic lateral - 14 μm/m N Stylus type - Spherical R 18 μm Tracking force range - 2 - 4 g Tracking force recommended - 3 g Internal impedance, DC resistance -  700 Ohm Internal inductance -  450 mH Recommended load resistance -  47 kOhm Recommended load capacitance -  200-600 pF Cartridge weight - 18,5 g Replacement stylus unit - MIX
Ortofon - Ortofon Concorde MK2 Mix Twin Cartridge
ON SALE
Quick View

Ortofon

Ortofon Concorde MkII MIX Single

Vinyl Accessories: UNAVAILABLE

Ortofon Concorde MkII MIX Single

The MIX is a general-purpose model for scratch and back-cueing
• Provides great performance and durability. It has a good quality spherical stylus, a solid cantilever, and serves general purposes well. • It offers both reasonable output, high sound quality and a good tracking ability for virtually any style of music. • With transparent sound across the spectrum and excellent handling ability, the MIX represents one of the longest running values in DJ cartridges.
Excellent price-to-performance ratio.
Concorde MIX technical data
  • Stylus Type Spherical
  • Tracking Force 3.0 g
  • Output Voltage 6 mV
  • Frequency Range 20-20.000 Hz
 
Output voltage at 1000Hz, 5cm/sec. - 6 mV Channel balance at 1kHz - 1,5 dB Channel separation at 1kHz - 20 dB Channel separation at 15 kHz - 15 dB Tracking ability at 315 Hz at recommended tracking force - 100 μm Compliance, dynamic lateral - 14 μm/m N Stylus type - Spherical R 18 μm Tracking force range - 2 - 4 g Tracking force recommended - 3 g Internal impedance, DC resistance -  700 Ohm Internal inductance -  450 mH Recommended load resistance -  47 kOhm Recommended load capacitance -  200-600 pF Cartridge weight - 18,5 g Replacement stylus unit - Mix
 
Ortofon - Ortofon Concorde MkII MIX Single
ON SALE
Quick View

Ortofon

Ortofon Stylus MK II Club (Replacement)

Vinyl Accessories: UNAVAILABLE

Ortofon Stylus MK II Club (Replacement Stylus)

The best sound quality achievable for traditional vinyl playback
The CLUB boasts the best specifications and best sound, making it an ideal choice for Club DJs in any environment: studio, broadcast or club. • The CLUB features a Special-Elliptic stylus that allows for detailed sound quality: Special-Elliptic stylus fits better in the groove and therefore has more contact area with the groove itself, extracting more intricate details, than is possible with a spherical diamond. • The CLUB’s 8 mV output voltage requires less gain from the preamps, providing cleaner sound reproduction and less susceptibility to feedback in live environments.The CLUB offers an outstanding platform for archival and sampling.
Concorde CLUB technical data
  • Stylus Type Special Elliptical
  • Tracking Force 3.0 g
  • Output Voltage 8 mV
  • Frequency Range 20–20.000 Hz
Output voltage at 1000Hz, 5cm/sec. - 8 mV Channel balance at 1kHz - 1 dB Channel separation at 1kHz - 25 dB Channel separation at 15 kHz - 15 dB Tracking ability at 315 Hz at recommended tracking force - 100 μm Compliance, dynamic lateral - 14 μm/m N Stylus type - Special Elliptical r/R 13/25 μm Tracking force range - 2 - 4 g Tracking force recommended - 3 g Internal impedance, DC resistance -  1000 Ohm Internal inductance -  650 mH Recommended load resistance -  47 kOhm Recommended load capacitance -  200-600 pF Cartridge weight - 18,5 g Replacement stylus unit - CLUB For information about set-up and alignment, stylus care and lifetime, break-in time, troubleshooting check out our DJ FAQ.
Spares and Merchandise
Concorde CLUB is available in following configurations: • Concorde TWIN (two Concorde MkII MIX cartridges with preinstalled styli), supplied in Flight case • Concorde Single (one Concorde MkII MIX cartridge with preinstalled stylus)
Ortofon - Ortofon Stylus MK II Club (Replacement)
ON SALE
Quick View

Ortofon

Ortofon Concorde MKii Club Twin Cartridge

ON SALE $559.99 Vinyl Accessories: $399.99 Buy

Ortofon Concorde MK2 Club Twin Cartridge

The best sound quality achievable for traditional vinyl playback
The CLUB boasts the best specifications and best sound, making it an ideal choice for Club DJs in any environment: studio, broadcast or club. • The CLUB features a Special-Elliptic stylus that allows for detailed sound quality: Special-Elliptic stylus fits better in the groove and therefore has more contact area with the groove itself, extracting more intricate details, than is possible with a spherical diamond. • The CLUB’s 8 mV output voltage requires less gain from the preamps, providing cleaner sound reproduction and less susceptibility to feedback in live environments.
The CLUB offers an outstanding platform for archival and sampling.
Concorde CLUB technical data
  • Stylus Type Special Elliptical
  • Tracking Force 3.0 g
  • Output Voltage 8 mV
  • Frequency Range 20–20.000 Hz
 
Output voltage at 1000Hz, 5cm/sec. - 8 mV Channel balance at 1kHz - 1 dB Channel separation at 1kHz - 25 dB Channel separation at 15 kHz - 15 dB Tracking ability at 315 Hz at recommended tracking force - 100 μm Compliance, dynamic lateral - 14 μm/m N Stylus type - Special Elliptical r/R 13/25 μm Tracking force range - 2 - 4 g Tracking force recommended - 3 g Internal impedance, DC resistance -  1000 Ohm Internal inductance -  650 mH Recommended load resistance -  47 kOhm Recommended load capacitance -  200-600 pF Cartridge weight - 18,5 g Replacement stylus unit - CLUB
 
Spares and Merchandise
Concorde CLUB is available in following configurations: • Concorde Single (one Concorde MkII MIX cartridge with preinstalled stylus) -
 
Ortofon - Ortofon Concorde MKii Club Twin Cartridge
$399.99 ON SALE
Quick View

Ortofon

Ortofon Concorde MKII Club Single

Vinyl Accessories: UNAVAILABLE

Ortofon Concorde MK2 Club Single Cartridge

The best sound quality achievable for traditional vinyl playback 

The CLUB boasts the best specifications and best  sound, making it an ideal choice for Club DJs in any environment:  studio, broadcast or club.
• The CLUB features a Special-Elliptic stylus that allows for detailed sound quality:  Special-Elliptic stylus fits better in the groove and therefore has  more contact area with the groove itself, extracting more intricate  details, than is possible with a spherical diamond.
• The CLUB’s 8 mV output voltage requires less gain from the preamps, providing cleaner sound reproduction and less susceptibility to feedback in live environments.

The CLUB offers an outstanding platform for archival and sampling.

    

Concorde CLUB technical data

  • Stylus Type Special Elliptical 
  • Tracking Force 3.0 g 
  • Output Voltage 8 mV 
  • Frequency Range 20–20.000 Hz 

 

Output voltage at 1000Hz, 5cm/sec. - 8 mV
Channel balance at 1kHz - 1 dB
Channel separation at 1kHz - 25 dB
Channel separation at 15 kHz - 15 dB
Tracking ability at 315 Hz at recommended tracking force - 100 μm
Compliance, dynamic lateral - 14 μm/m N
Stylus type - Special Elliptical r/R 13/25 μm
Tracking force range - 2 - 4 g
Tracking force recommended - 3 g
Internal impedance, DC resistance -  1000 Ohm
Internal inductance -  650 mH
Recommended load resistance -  47 kOhm
Recommended load capacitance -  200-600 pF
Cartridge weight - 18,5 g
Replacement stylus unit - CLUB

 

For information about set-up and alignment, stylus care and lifetime, break-in time, troubleshooting check out our DJ FAQ.

 

Spares and Merchandise

Concorde CLUB is available in following configurations: 
• Concorde TWIN (two Concorde MkII MIX cartridges with preinstalled styli), supplied in Flight case
• Concorde Single (one Concorde MkII MIX cartridge with preinstalled stylus)

 

Ortofon - Ortofon Concorde MKII Club Single
ON SALE

        
back to top